Radiator Manufacturing
We have been manufacturers of quality brass and copper radiators for over 30 years and are experts. As a leading radiator manufacturer in the Bahamas, Ralph’s supplies all types of radiators. Whether it is a radiator for a motorcycle or a generator or large truck, we can build it. Our radiators are manufactured with the highest quality brass and copper materials and are backed by a 2-year warranty.
We can also convert all aluminium radiators into complete custom built brass copper radiators. We build custom tanks and attach them to a copper core.
Before
After
Before
After
Send Us a Message
Radiator Core Manufacturing
Many radiators can have the core replaced. This is required when the core is leaking badly, too damaged to be repaired, fins are corroded, or the header plate is cracked or damaged. We have the machinery to manufacture copper and brass radiator cores.
The radiator cores are measured and manufactured to the specifications of our clients. Re-coring uses your old tanks, brackets and transmission oil cooler. Re-coring is quite often a much cheaper option than a new radiator.
HOW TO MEASURE
A RADIATOR CORE
Core Height: It is the dimension determined by the length of the tube (from plate to plate). In the image, see reference (A).
Core Width: It is the dimension determined by measuring between the sides (to the sides of the core). Keep in mind that only the core is measured, not the sides. In the reference image (B).
Core Thickness: Carefully insert a piece of wire through the core, all the way to the other side of the core, and mark it. Withdraw it slowly, and measure the depth obtained. In the reference image (C).
Header Length: It is the dimension determined by measuring the length of the plate. In the image, see reference (D).
Header Width: It is the dimension determined by measuring the sides of the plate. In the reference image (E).